Mostly Robots Wemos D1 4 Channel MOSFET Shield Development Board
Available from:
Tindie.com
Manufacturer:
Blog.mostlyrobots.net
Install method:
Shield for Wemos D1 mini
| GPIO # | Component |
|---|---|
| GPIO00 | User |
| GPIO01 | User |
| GPIO02 | Led 1 |
| GPIO03 | User |
| GPIO04 | User |
| GPIO05 | User |
| GPIO09 | User |
| GPIO10 | User |
| GPIO12 | Relay 3 |
| GPIO13 | Relay 2 |
| GPIO14 | Relay 4 |
| GPIO15 | Relay 1 |
| GPIO16 | User |
| GPIO17 | User |
Configuration
{"NAME":"MOSFET","GPIO":[1,1,288,1,1,1,1,1,226,225,227,224,1,1],"FLAG":0,"BASE":18}Four Channel MOSFET Shield for Wemos D1 Mini contains four separate 30v / 5A MOSEFTs in a D1 mini shield form factor. The MOSFETs can drive four separate loads up to 30v and 5A each, or the channels can be connected in parallel to drive a single bigger load, up to a potential 20A. The MOSFETs use GPIO12, GPIO13, GPIO14 & GPIO15.