Nedis G125 5.5W 350lm Twisted Filament CCT Bulb (WIFILT10GDG125)
Available from:
Amazon.de
Alza.de
Manufacturer:
Nedis.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM2 |
| GPIO13 | None |
| GPIO14 | PWM1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"WIFILF10GDG125","GPIO":[0,0,0,0,0,0,0,0,38,0,37,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-06-13).
Tuya-Convert might not be possible for this device since the template was added (2020-06-13).
A little tricky reset procedure, has to be turned on and off four times, wait for a couple of seconds and if it starts to blink, it ready for flashing.