NEO Coolcam NAS-WR01W 16A
Power Monitoring
Plug
Model reference: NAS-WR01W
Available from:
Aliexpress.com
Amazon.de
Gearbest.com
Flashed with:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Button1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | BL0937 CF |
| GPIO05 | HLWBL CF1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | HLWBL SELi |
| GPIO13 | Led1i |
| GPIO14 | Relay1 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Template
{"NAME":"Neo Coolcam 16","GPIO":[17,0,0,0,134,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":49}Alternative Template
{"NAME":"Neo Coolcam 16","GPIO":[17,0,0,0,133,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":49}Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.
For more accurate energy consumption measurements this device requires power monitoring calibration.