{"NAME":"NTB10","GPIO":[0,0,0,0,41,38,0,0,39,51,40,37,0],"FLAG":0,"BASE":18}

Requires SetOption15 1

IR Remote

These bulbs come with an IR remote. Use the following rule to get the basic features of the remote working:

‘Rule1 on IrReceived#Data=0x21C724DB DO POWER TOGGLE ENDON on IrReceived#Data=0x21C754AB DO Backlog CT 472; Dimmer 32; Scheme 0 ENDON on IrReceived#Data=0x21C704FB DO Backlog CT 500; Dimmer 100; Scheme 0 ENDON on IrReceived#Data=0x21C7847B DO Backlog Dimmer +; Scheme 0 ENDON on IrReceived#Data=0x21C744BB DO Backlog Dimmer -; Scheme 0 ENDON on IrReceived#Data=0x21C714EB DO CT - ENDON on IrReceived#Data=0x21C7E41B DO CT + ENDON’ Requires SetOption58 1 to work. (Use the command Rule1 1 to enable the rule afterwards. Remote buttons not not configured: RGB, Dynamic Modes, Static Modes)

IR Codes

• Toggle ON/OFF 0x21C724DB
• Night Light 0x21C754AB
• 100% 0x21C704FB
• Brighten 0x21C7847B
• Darken 0x21C744BB
• Colder 0x21C714EB
• Warmer 0x21C7E41B
• RGB 0x21C7649B
• Toggle Dynamic Mode 0x21C7827D
• Toggle Static Mode 0x21C7C43B