Oakter OakPlug Mini 10A Plug
Oakter OakPlug Mini 10A

Available from:

Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 Relay 1
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 LedLink
GPIO13 Led_i 1
GPIO14 None
GPIO15 None
GPIO16 None
GPIO17 None
{"NAME":"Oakter OakPlug Mini","GPIO":[0,0,0,0,224,0,0,0,544,320,0,0,0,0],"FLAG":0,"BASE":18}

WSP06V2.02 Oakter 10042019

Identified the onboard header pins using a multimeter, so soldering is not required and one can use the onboard header pins based on below info.

Onboard Header Pins (Orientation of board: Relay towards you on the right, header pins on the left):

Header Pins from Left:

  • Pin 1 - VCC
  • Pin 2 - GPIO0
  • Pin 3 - RX
  • Pin 4 - TX
  • Pin 5 - GND