OLED Display Module 0.66" for Wemos D1 Mini Display
Available from:
Aliexpress.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | User |
| GPIO01 | User |
| GPIO02 | User |
| GPIO03 | User |
| GPIO04 | I2C SDA |
| GPIO05 | I2C SCL |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | User |
| GPIO13 | User |
| GPIO14 | User |
| GPIO15 | User |
| GPIO16 | OLED Reset |
| FLAG | User |
Configuration (old format, will be converted to new template when applied)
{"NAME":"OLED 64x48","GPIO":[255,255,255,255,6,5,0,0,255,255,255,255,162],"FLAG":15,"BASE":18}Requires tasmota-display.bin to support
DisplayAddress 0x3C
DisplayDimmer 100
DisplayModel 2
DisplayWidth 64
DisplayHeight 48
Since the display is very small, I recommend to use Font 0. There are 10.5 columns, so if you set 11 columns, the last character is truncated although readable.
DisplayFont 0
DisplayRows 6
DisplayCols 11