Onearz Connect Smart Plug
Onearz Connect Smart

Available from:

Flashed with:

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 Led1
GPIO05 Relay1
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 Button1
GPIO14 None
GPIO15 None
GPIO16 None
ADC0 None
Template for Tasmota v9.1+
{"NAME":"Onearz Power Plug Wifi","GPIO":[0,0,0,0,288,224,0,0,0,32,0,0,0,0],"FLAG":0,"BASE":18}
Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published (2021-05-15).

At the contrary of the “official” documentation says, Red LED is ON when the plug is ON, and Blue LED is ON when plug is off, I couldn’t find a way of having both LED ON when the plug is ON. Red LED is linked to the relay, it seems it cannot be changed.