Powertech 4AC 2USB Power Strip (MS6107)
Available from:
Jaycar.com.au
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | Led1 |
| GPIO02 | None |
| GPIO03 | Button1 |
| GPIO04 | Relay1 |
| GPIO05 | Relay2 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay4 |
| GPIO13 | Relay5 |
| GPIO14 | Relay3 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Ptech MS6107","GPIO":[0,52,0,17,21,22,0,0,24,25,23,0,0],"FLAG":0,"BASE":18}Be aware that this device uses triangular screws. You may need to purchase a bit/driver set as well as this product. You need to desolder the TYWE2S in order to flash it as the TX and RX lines are shared.
Pinout
.