Qualitel Breaker Switch Module (ASB01)
Available from:
Takealot.com
Manufacturer:
Qualitel.co.za
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Relay 1 |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Button 1 |
| GPIO13 | Led_i 2 |
| GPIO14 | Led 1 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"Qualitel Smart Switch","GPIO":[0,0,0,0,224,0,0,0,32,321,288,0,0,0],"FLAG":0,"BASE":18}The button is not connected to GPIO0 so you need to use the GPIO0 pin on the PCB shorted to GND when powering on to enable programming.