Shelly 2PM Gen4 Switch Module (S4SW-002P16EU)
Available from:
Shellyparts.de
Manufacturer:
Kb.shelly.cloud
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | ADE7953 RST |
| GPIO01 | ??? |
| GPIO02 | LedLinki |
| GPIO03 | Relay 2 |
| GPIO04 | ADC Temp |
| GPIO05 | Relay 1 |
| GPIO06 | I2C SDA 1 |
| GPIO07 | I2C SCL 1 |
| GPIO08 | None |
| GPIO09 | None |
| GPIO10 | Switch_n 2 |
| GPIO11 | Switch_n 1 |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
| GPIO18 | None |
| GPIO19 | None |
| GPIO20 | None |
| GPIO21 | None |
| GPIO22 | None |
| GPIO23 | None |
| GPIO24 | None |
| GPIO25 | None |
| GPIO26 | None |
| GPIO27 | None |
| GPIO28 | None |
| GPIO29 | ADE7953 RST |
| GPIO30 | None |
Configuration for ESP32-C6
{"NAME":"Shelly 2PM Gen4","GPIO":[9472,3458,576,225,4736,224,640,608,0,0,193,192,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,9472,0],"FLAG":0,"BASE":1}Shelly Temperature Sensor
In order for the temperature sensor to display accurate values, the analog input must be configured correctly. This can be done using the command: “AdcParam1 2,10000,10000,3350”.