Shelly Dimmer Dimmer Module
Available from:
Amazon.com
Amazon.de
Manufacturer:
Shelly.cloud
Install method:
MgOS to Tasmota
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | Serial Tx |
| GPIO02 | None |
| GPIO03 | Serial Rx |
| GPIO04 | SHD Boot 0 |
| GPIO05 | SHD Reset |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Switch_n 1 |
| GPIO13 | None |
| GPIO14 | Switch_n 2 |
| GPIO15 | Led 1 |
| GPIO16 | None |
| GPIO17 | ADC Temp |
Configuration
{"NAME":"Shelly Dimmer 1","GPIO":[0,3200,0,3232,5568,5600,0,0,192,0,193,288,0,4736],"FLAG":0,"BASE":18}Supported since Tasmota 9.1.0.2+
After flashing Tasmota, apply the template and then use the Firmware upgrade - File upload menu to flash the required STM32 firmware (provided at shelly-dimmer-stm32 releases page) to the MCU. The template must be set before flashing the STM32 firmware.