Shelly Plus 1PM Power Monitoring Switch Module (SNSW-001P16EU)
Available from:
Domadoo.fr
Amazon.de
Idealo.de
Aliexpress.com
Manufacturer:
Shelly.cloud
Install method:
MgOS32 to Tasmota32
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Switch_n 1 |
| GPIO05 | BL0937 CF |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
| GPIO18 | HLWBL CF1 |
| GPIO19 | None |
| GPIO20 | None |
| GPIO21 | None |
| GPIO22 | None |
| GPIO23 | HLWBL SELi |
| GPIO24 | None |
| GPIO25 | Button 1 |
| GPIO26 | Relay 1 |
| GPIO27 | None |
| GPIO6 | None |
| GPIO7 | None |
| GPIO8 | None |
| GPIO11 | None |
| GPIO32 | ADC Temp |
| GPIO33 | None |
| GPIO34 | None |
| GPIO35 | None |
| GPIO36 | None |
| GPIO37 | None |
| GPIO38 | None |
| GPIO39 | None |
Configuration for ESP32
{"NAME":"Shelly Plus 1PM","GPIO":[0,0,0,0,192,2720,0,0,0,0,0,0,0,0,2656,0,0,0,0,2624,0,32,224,0,0,0,0,0,4736,0,0,0,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,10000,10000,3350"}
Flash only with ESP32-SOLO1
The device will restart and will be automagically configured.
tasmota32solo1... binaries.
WARNING!!! Devices with firmaware v1.10+ cannot be flashed OTA anymore
For more accurate energy consumption measurements this device requires power monitoring calibration.
Auto-configuration
After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration.The device will restart and will be automagically configured.
Pin-Layout is on the image, credit goes to Kalin Dimitrov!