Shelly Plus 1PM Mini Switch Module (SNSW-001P8EU)
Available from:
Domadoo.fr
Amazon.de
Reichelt.com
Conrad.com
Manufacturer:
Shelly.com
Install method:
MgOS32 to Tasmota32
| GPIO # | Component |
|---|---|
| GPIO00 | LedLinki |
| GPIO01 | Button 1 |
| GPIO02 | None |
| GPIO03 | ADC Temp |
| GPIO04 | None |
| GPIO05 | Relay 1 |
| GPIO06 | Serial Tx |
| GPIO07 | BL0492 Rx |
| GPIO08 | None |
| GPIO09 | None |
| GPIO10 | Switch_n 1 |
| GPIO12 | None |
| GPIO13 | None |
| GPIO18 | None |
| GPIO19 | None |
| GPIO20 | None |
| GPIO21 | None |
Configuration for ESP32-C3
{"NAME":"Shelly Plus1PMMini","GPIO":[576,32,0,4736,0,224,3200,8161,0,0,192,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,5600,4700,3350"}
WARNING!!! Devices with firmaware v1.10+ cannot be flashed OTA anymore
The device will restart and will be automagically configured.
Auto-configuration
After flashing Tasmota, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select your device from the drop-down and click Apply Configuration.The device will restart and will be automagically configured.
If you’re doing MgOS to Tasmota conversion using Autoconfig is mandatory otherwise your device will end up bricked.