Signstek EOP03-EU Outdoor Plug
Available from:
Amazon.de
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Led1i |
| GPIO05 | Led2i |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Button1 |
| GPIO14 | Relay2 |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | User |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Signstek EOP03","GPIO":[0,0,0,0,56,57,0,0,21,17,22,0,0],"FLAG":15,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2019-11-04).
Tuya-Convert might not be possible for this device since the template was added (2019-11-04).
Blue LED is controlled by GPIO4, green LED by GPIO5. LED1 (blue in my template) is WiFi state and LED2 plug state (on/off).