{"NAME":"NX-SM200","GPIO":[0,0,0,17,134,132,0,0,0,52,21,130,0],"FLAG":0,"BASE":45}

For more accurate energy consumption measurements this device requires power monitoring calibration.

Alternative template for .fr seller:

{"NAME":"NX-SM200","GPIO":[17,0,0,0,133,132,0,0,131,158,21,0,0],"FLAG":0,"BASE":18}

Another EU template (recognised by the status LEDs leaking light around the button):

{"NAME":"NX-SM200","GPIO":[576,0,0,2624,0,2720,0,0,0,32,2656,224,0,0],"FLAG":0,"BASE":18}

If the original template works but after calibration the power factor is too low and current too high (and power never exceeds the one it was calibrated with), then try using:

{"NAME":"NX-SM200","GPIO":[0,0,0,32,2688,2656,0,0,2624,576,224,0,0,0],"FLAG":0,"BASE":18}

It’s basically the french one but button pin is from the original one.