SmartVU Home Touch Light Switch (SHWSW1)
Available from:
Smartvuhome.co.nz
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led 3 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | Button 1 |
| GPIO04 | Relay 1 |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | Led 2 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"SHWSW1","GPIO":[290,0,0,32,224,0,0,0,0,0,289,0,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2022-04-02).
Tuya-Convert might not be possible for this device since the template was added (2022-04-02).
Hold button for 20-25 seconds to enter EZ flash mode