Smatrul 5A RF433Mhz 4 Gang Touch Switch (TMW4-01(EU))
Smatrul 5A RF433Mhz 4 Gang Touch

Available from:


Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 Switch 1
GPIO04 Switch 3
GPIO05 Switch 2
GPIO09 None
GPIO10 None
GPIO12 Relay 2
GPIO13 Relay 1
GPIO14 Relay 3
GPIO15 None
GPIO16 None
GPIO17 None
{"NAME":"Smatrul RF433Mhz 3 Gang Touch Switch (TMW4-01(EU))","GPIO":[0,0,0,160,162,161,0,0,225,224,226,0,0,0],"FLAG":0,"BASE":18}

Connect GPIO0 to ground and Attach a lead also to RST. You will need to briefly short RST to GND just after powering up the device and after you have started the flash app (Tasmotizer or esptool.py) as it doesn’t stay in programmable mode for very long. Pinout is as follows, starting with the pad closest to the 433 pcb antenna. 3.3V RX TX GPIO0 RST GND.