Sonoff POW Origin 16A Power Monitoring Switch Module (POWR316)
Sonoff POW Origin 16A

Available from:


Install method:
USB to Serial

GPIO #Component
GPIO00 Button 1
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 None
GPIO05 LedLinki
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 Relay 1
GPIO14 None
GPIO15 None
GPIO16 CSE7766 Rx
GPIO17 None
GPIO18 Led_i 1
GPIO19 None
GPIO20 None
GPIO21 None
GPIO22 None
GPIO23 None
GPIO24 None
GPIO25 None
GPIO26 None
GPIO27 None
GPIO6 None
GPIO7 None
GPIO8 None
GPIO11 None
GPIO32 None
GPIO33 None
GPIO34 None
GPIO35 None
GPIO36 None
GPIO37 None
GPIO38 None
GPIO39 None
Configuration for ESP32
{"NAME":"Sonoff POWR316","GPIO":[32,0,0,0,0,576,0,0,0,224,0,0,3104,0,320,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
For more accurate energy consumption measurements this device requires power monitoring calibration.

Use the device button to enable flash mode.

Follow the GitHub issue thread for development updates