Steren Apagador Switch (SHOME-115)
Available from:
Steren.com.mx
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | Button1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Led1i |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"SHOME-115","GPIO":[17,0,0,0,0,0,0,0,21,56,0,0,0],"FLAG":0,"BASE":18}Remove 4 screws from the back of the device and separate the two pieces, the front plate have clear markings of TX, RX, GND, 3V3 and GPIO0, attach jumper wires to a USB-TTL, plug and flash (Tasmotizer works very well).