Steren Apagador Doble Switch (SHOME-116)
Available from:
Steren.com.mx
Manufacturer:
Steren.com.mx
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | Led 1 |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | Button 1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay 1 |
| GPIO13 | Relay 2 |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | Button 2 |
| GPIO17 | None |
Configuration
{"NAME":"STEREN SHOME-116","GPIO":[0,0,288,0,0,32,0,0,224,225,0,0,33,0],"FLAG":0,"BASE":18}Remove 4 screws from the back of the device and separate the two pieces, the front plate have clear markings of TX, RX, GND, 3V3 and GPIO0, attach jumper wires to a USB-TTL, plug and flash (Tasmotizer works very well).