Logo
Steren Power Monitoring Plug
US
Model reference: SHOME-135
Steren

Available from:





Manufacturer:
Steren.com.mx

Flashed with:
Serial port

GPIO #Component
GPIO00 None
GPIO01 Led1
GPIO02 None
GPIO03 Button1
GPIO04 BL0937 CF
GPIO05 HLWBL CF1
GPIO09 None
GPIO10 None
GPIO12 HLWBL SELi
GPIO13 Led2
GPIO14 Relay1
GPIO15 None
GPIO16 None
ADC0 None
Template for Tasmota v9.1+
{"NAME":"SHOME-135","GPIO":[0,288,0,32,2720,2656,0,0,2624,289,224,0,0,0],"FLAG":0,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.

This is a complicated tasmota flash it uses a TYWE2S (https://github.com/ct-Open-Source/tuya-convert/issues/862) chip and is very hard to access it, I had to cut with a Dremel tool the shell of the plug because there was no way of removing it from the shell