SWB1 Power Strip
Available from:
Amazon.com
Amazon.com
Manufacturer:
Lingan.en.alibaba.com
| GPIO # | Component |
|---|---|
| GPIO00 | Led1 |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | Relay4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay1 |
| GPIO13 | Button1 |
| GPIO14 | Relay2 |
| GPIO15 | Relay3 |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"SWB1","GPIO":[52,0,0,0,0,24,0,0,21,17,22,23,0],"FLAG":0,"BASE":18}FCC ID: 2AJK8-SWB1
Product
SWB1 Wi-Fi smart power strip with 4 main ports. Each port can be controlled manually FCCID: 2AJK8-SWB1 This is a new device not using the Tuya PCB but is a esp8266ex based and works great with Tasmota
The product can be purchased on amazon.ca (could be found on other amazon sites)
Inside
Inside PCB
The chip used WT8266-S1. The specs can be found on wireless-tags.com
JTAG
Pins used. You can choose one of 3 GND to your liking. the RESET(RST) pin is also marked for those that use that pin to reset the chip while flashing