Logo
Sygonix 4AC Power Strip (SY-4538254)
EU
Sygonix 4AC

Available from:
Amazon.de
Idealo.de
Conrad.de





Install method:
Tuya-Convert

GPIO #Component
GPIO00 LedLinki
GPIO01 Button 1
GPIO02 None
GPIO03 Relay 8
GPIO04 Relay 6
GPIO05 Relay 7
GPIO09 None
GPIO10 None
GPIO12 Relay 2
GPIO13 Relay 1
GPIO14 Relay 3
GPIO15 Relay 5
GPIO16 Relay_i 4
GPIO17 None
Configuration
{"NAME":"Sygonix SY-4538254","GPIO":[576,32,0,231,229,230,0,0,225,224,226,228,259,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2022-11-13).

Multiple socket, every GPIO works like a push button, one for on, one for off, that is you need 2 GPIOs for one Relay:

  • command to switch on Relay 1: Backlog Power1 on; Delay 10; Power1 off
  • command to switch off Rel 1: Backlog Power2 on; Delay 10; Power2 off

the same with Power3/4 for Relay 2 - and so on. I’ve found no way to read the actual state of the relays!