TanTan WP2 Power Monitoring Plug (WP2)
Available from:
Amazon.com
Manufacturer:
Tantan-us.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led2i |
| GPIO01 | Led1i |
| GPIO02 | LedLinki |
| GPIO03 | User |
| GPIO04 | Relay1 |
| GPIO05 | BL0937 CF |
| GPIO09 | User |
| GPIO10 | User |
| GPIO12 | HLWBL SELi |
| GPIO13 | Button1 |
| GPIO14 | HLWBL CF1 |
| GPIO15 | Relay2 |
| GPIO16 | Button2 |
| FLAG | User |
Configuration (old format, will be converted to new template when applied)
{"NAME":"TanTan WP2","GPIO":[57,56,158,255,21,134,255,255,131,17,132,22,18],"FLAG":15,"BASE":18}
For more accurate energy consumption measurements this device requires power monitoring calibration.
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-04-02).
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-04-02).
LED1 is wired directly to Relay1. LED1i assigned to GPIO1 because LED2i won’t work without an assigned LED1. By default relay LEDs are red. GPIO2 lights up a blue LED.