Techvilla TE001 LED Strip (TE-TE001)
Available from:
Amazon.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | Tuya Tx |
| GPIO02 | None |
| GPIO03 | Tuya Rx |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"TE-TE001","GPIO":[0,107,0,108,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":54}Serial flash needed. TuyaMCU based device. TYWE3S chip. When flashing you must ground the ‘RST’ pin on the bottom of the PCB
Add the following commands via console:
Backlog TuyaMCU 11,20; TuyaMCU 26,21; TuyaMCU 21,22; TuyaMCU 25,23; TuyaMCU 24,24; Ledtable 0; DimmerRange 10,1000
Pinout
.