Logo
Teckin SB50 v3 A19 800lm RGBCCT Bulb
E26
Teckin SB50 v3 A19 800lm

Available from:
Amazon.com







GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 PWM1
GPIO05 PWM4
GPIO09 None
GPIO10 None
GPIO12 PWM2
GPIO13 PWM5
GPIO14 PWM3
GPIO15 None
GPIO16 None
FLAG None
Template (old version)
{"NAME":"Teckin SB50v3","GPIO":[0,0,0,0,37,40,0,0,38,41,39,0,0],"FLAG":0,"BASE":18}
NOTICE!!! Manufacturer has started using unsupported non-ESP8266 chips recently and this device might not be compatible anymore. Check seller descriptions or contact them before buying!



Built from the V2 template that didn’t work for my model.

Tuya-Convert did not work as of 10/1/2020. Flashed using serial. Plastic diffuser came off pretty easily. LED board is attached with a pin connector, so removing it to get access to the control board works, but separating the glue can be a bit of a challenge. Serial pins are labeled and aren’t too hard to solder in-place to. Cannot remove wifi board without removing Bulb without Top Front Back 1 Back 2