Tetra® Connect Automatic Feeder Other (AQ-78247)
Available from:
Amazon.com
Manufacturer:
Tetra-fish.com
Install method:
USB to Serial
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Relay 1 |
| GPIO05 | Led 1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Button_i 3 |
| GPIO13 | Button_i 1 |
| GPIO14 | Button_i 2 |
| GPIO15 | None |
| GPIO16 | Led 2 |
| GPIO17 | None |
Configuration
{"NAME":"Tetra Connect","GPIO":[0,0,0,0,224,288,0,0,98,96,97,0,289,0],"FLAG":0,"BASE":18}The device contains an ESP12F. To put the device in programming mode, I tied GPIO0 to ground. GND, TX and RX are the only connections needed to successfully flash the device with tasmota. With the provided configuration, it’s necessary to run SetOption1 1 and SetOption13 1 to prevent the device from resetting.