Tinxy 1 Node 16A for AC/Geyser Switch Module Configuration for Tasmota

Tinxy 1 Node 16A for AC/Geyser Switch Module

Available from:
Tinxy.in
Amazon.in

Manufacturer:
Tinxy.in

Install method:
USB to Serial

GPIO #	Component
GPIO00	Button 1
GPIO01	None
GPIO02	None
GPIO03	None
GPIO04	Switch 1
GPIO05	Relay 1
GPIO09	None
GPIO10	None
GPIO12	Led 1
GPIO13	None
GPIO14	PWM 1
GPIO15	None
GPIO16	None
GPIO17	None

Configuration

{"NAME":"Tnxy16A","GPIO":[32,0,0,0,160,224,0,0,288,0,416,0,0,0],"FLAG":0,"BASE":18}

Flashing is easy -> Has all required header 3v tx 4x gnd . GPIO0 -> Button . This device has a additional power/rst chipset which resets ESP if no PWM on GPIO14.

Hence :

setoption15 0
setoption68 0 
Pwmfrequency 1000
Pwmrange 1023
pwm1 512

Backlog rule on system#boot do pwm1 512 endon; Rule 1 1