Tonbux SM-SO301-U Power Strip (2AJ5F-SM-3O301)
Available from:
Amazon.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led1i |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Relay1i |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay3i |
| GPIO13 | Relay2i |
| GPIO14 | Relay4i |
| GPIO15 | None |
| GPIO16 | Relay5 |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Tonbux SM-SO30","GPIO":[56,0,0,0,29,0,0,0,31,30,32,0,25],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2020-01-08).
Tuya-Convert might not be possible for this device since the template was added (2020-01-08).
Using this template, plugs are “off” by default. The LED is off unless any of the Relays are “on”. Blue LED is on GPIO0 (used in template). Red LED is on GPIO3 (not used in template).
Tonbux rebrand of Xenon SM-SO301-U