Treatlife Dual Outdoor Dimmer (DP12)
Treatlife Dual Outdoor

Available from:


Install method:
Replace module

GPIO #Component
GPIO00 User
GPIO01 Tuya Tx
GPIO02 User
GPIO03 Tuya Rx
GPIO04 User
GPIO05 User
GPIO09 None
GPIO10 None
GPIO12 User
GPIO13 User
GPIO14 User
GPIO15 User
GPIO16 User
GPIO17 None
{"NAME":"DP12","GPIO":[1,2272,1,2304,1,1,0,0,1,1,1,1,1,0],"FLAG":0,"BASE":54,"CMND":"SO97 1 | TuyaMCU 11,1 | TuyaMCU 12,7 | TuyaMCU 21,2 | TuyaMCU 22,8 | SO20 1 | SO54 1"}
This device uses a Tasmota incompatible module which needs to be replaced with an ESP . Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.

Commands applied with the template

SetOption97 1
BackLog TuyaMCU 11,1;TuyaMCU 12,7;TuyaMCU 21,2;TuyaMCU 22,8;SetOption20 1;SetOption54 1

Wait for tasmota reset to complete then:

BackLog TuyaSend2 3,100; DimmerRange 100,1000;Dimmer2Range 100,1000

Now you should have two toggle buttons and two dimmer slides on the Tasmota main menu.