Tuya Air Detector 6 in 1 Sensor (DCR-KQG)
Tuya Air Detector 6 in 1

Available from:


Install method:
Replace module

GPIO #Component
GPIO00 User
GPIO01 Tuya Tx
GPIO02 LedLink
GPIO03 Tuya Rx
GPIO04 User
GPIO05 User
GPIO09 User
GPIO10 User
GPIO12 User
GPIO13 User
GPIO14 User
GPIO15 User
GPIO16 User
GPIO17 User
{"NAME":"DCR-KQG","GPIO":[1,2272,544,2304,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":54,"CMND":"TuyaMCU 80,2 | TuyaMCU 71,18 | TuyaMCU 73,19 | TuyaMCU 99,20 | TuyaMCU 76,21 | TuyaMCU 77,22 | HumRes 1 | TempRes 1 "}
This device uses a Tasmota incompatible module which needs to be replaced with an ESP. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.

There is also a formaldehyde value on dpId 20, but there is no fnId for that type of sensor