Logo
Vaticas 1 Switch
US
Model reference: S2.KGKG05.L
Vaticas 1

Available from:
Amazon.com






Install method:
Tuya-Convert

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 Button1
GPIO04 Relay1
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 None
GPIO14 Led1
GPIO15 None
GPIO16 None
FLAG None
Configuration (old version)
{"NAME":"Vaticas","GPIO":[0,0,0,17,21,0,0,0,0,0,52,0,0],"FLAG":0,"BASE":18}
Tuya-Convert might not be possible for this device since the template was added (2020-02-24). All new Tuya devices have firmware preventing flash but it is still possible to Tuya-Convert old stock devices without connecting them to the Tuya app.

Works with tuya-convert. If it is already registered with Smart Life app, just factory reset the switch which will put it on pairing mode