Vivitar Plug (HA-1004)
Available from:
Walmart.com
Shopmyexchange.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | Led_i 1 |
| GPIO01 | None |
| GPIO02 | Led_i 2 |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | Button 1 |
| GPIO14 | None |
| GPIO15 | Relay 1 |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"Vivitar HA-1004","GPIO":[320,0,321,0,0,0,0,0,0,32,0,224,0,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2023-01-13).
Tuya-Convert might not be possible for this device since the template was added (2023-01-13).
This configuration is only for the Round Vivitar plug; not the square version (It’s physically marked HA-1003 for some reason though). This configuration contains both LEDs, Blue enable (during use) (GPIO2) and Red (GPIO0) and the Relay trigger (GPIO13). Button operation is enabled as well (GPIO15).