Available from:
Manufacturer:
Lite.al
Install method:
Tasmota pre-installed
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | Relay 2 |
| GPIO05 | Relay 1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
{"NAME":"ITzy","GPIO":[0,0,0,0,225,224,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":54}
Attention: current version of the device might require installing your own custom build of Tasmota. Shutter Calibration requires vendor’s Cloud-App. Reason: “ShutterMode” is not included in the preinstalled Tasmota build.
Also, only restricted set of Tasmota features is supported. Reason: The device uses the dual controller (Tuya) design as described on Tuya Covers in Tasmota