Logo
Yeelight Jiaoyue 260mm 10W CCT Ceiling Light
Model reference: YLXD62YI
Yeelight Jiaoyue 260mm 10W CCT

Available from:
Aliexpress.com
Aliexpress.com





Install method:
USB to Serial

GPIO #Component
GPIO00 None
GPIO01 None
GPIO02 None
GPIO03 None
GPIO04 None
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 None
GPIO14 None
GPIO15 None
GPIO16 None
GPIO17 None
GPIO18 None
GPIO19 PWM 2
GPIO20 None
GPIO21 PWM 1
GPIO22 None
GPIO23 None
GPIO24 None
GPIO25 None
GPIO26 None
GPIO27 None
GPIO6 None
GPIO7 None
GPIO8 None
GPIO11 None
GPIO32 None
GPIO33 None
GPIO34 None
GPIO35 None
GPIO36 None
GPIO37 None
GPIO38 None
GPIO39 None
Configuration for ESP32
{"NAME":"Yeelight LED Ceiling Light 260","GPIO":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,417,0,416,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}
Flash only with tasmota32solo1.bin build for ESP32-SOLO-1. Flashing instructions for tasmota32 firmware.

All pins necessary for flashing are labelled on the PCB.

PCB image

  1. RX - Green
  2. TX - Violet
  3. IO0 - Red near TX/RX
  4. 3.3V - Red
  5. GND - Brown/black

Pinout