Yunshan 7-30V 10A Relay Board (HW-622)
Available from:
Amazon.com
Amazon.de
Aliexpress.com
| GPIO # | Component |
|---|---|
| GPIO00 | Button1 |
| GPIO01 | User |
| GPIO02 | Led1 |
| GPIO03 | User |
| GPIO04 | Relay1 |
| GPIO05 | Switch2 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay2 |
| GPIO13 | None |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"Yunshan 10A","GPIO":[17,255,52,255,21,10,0,0,22,0,0,0,0],"FLAG":0,"BASE":18}This device is supported directly in the firmware by selecting module “Yunshan Relay (33)” or using command Module 33
Note Not sure the input feedback will work by selecting module name. See template above for GPIO 5 and 8.
More in depth article on Arduino++ blog.
