Zemismart KS-811 3 Gang Switch
Available from:
Amazon.com
Aliexpress.com
Amazon.com.au
Manufacturer:
Zemismart.com
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | Led1i |
| GPIO03 | None |
| GPIO04 | Button3 |
| GPIO05 | Button2 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay2 |
| GPIO13 | Relay1 |
| GPIO14 | Relay3 |
| GPIO15 | None |
| GPIO16 | Button1 |
| FLAG | None |
Configuration (old format, will be converted to new template when applied)
{"NAME":"KS-811 Triple","GPIO":[0,0,56,0,19,18,0,0,22,21,23,0,17],"FLAG":0,"BASE":18}This device now comes with a Wi-Fi module incompatible with Tasmota
New from Factory (Feb ‘19) has patched firmware blocking Tuya-Convert New from Factory (Jan ‘22) board version KS811_B_V02 does not have an ESP8266 chipset but rather a Beken BK7231N chipset, which is totally incompatible with Tasmota.
Flash Instructions: Unscrew 4 screws on rear, use serial to flash. Ground IO0 while booting to get into flash mode.