{"NAME":"ESP-ALDI-LIGHT","GPIO":[0,0,0,420,417,416,418,451,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}

This device uses CB2L module which needs to be replaced with DMP-L1, ESP8685-WROOM-05, DT-ESP-C05 or ESP8684-WROOM-05. Read more about module replacement in a detailed guide.

This is relatively easy replacement. No hot gun, etc, just soldering iron and solder wick. Chip has to be programmed prior to soldering. I used ESP8685-WROOM-05 which fits into the same slot with no further modifications required.

Tasmota options required for this template:

PowerOnState 1
Setoption37 25
Setoption92 1
LedTable 0