Arlec Smart 10W 830lm RGBCCT Bulb (GLD320HA)
Available from:
Bunnings.com.au
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | ??? |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | SM2135 CLK |
| GPIO14 | None |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"Arlec GLD320HA","GPIO":[0,0,0,0,4067,0,0,0,0,4032,0,0,0,0],"FLAG":0,"BASE":18,"CMND":"SO37 6"}
This device uses
WB2L
module which needs to be replaced with
DMP-L1, ESP8685-WROOM-05, DT-ESP-C05 or ESP8684-WROOM-05
. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.
SetOption37 6 is required to remap the R,G,Ww,Wc,B configuration as detailed in https://tasmota.github.io/docs/SetOption37/