With over 10 Meters range, the IR Bridge allows you to control almost any infrared device and is compatible with Tasmota and ESPhome. If you are feeling ambitious then you can even use the IRremoteESP8266 Library with Arduino!
With the 38kHz IR Receiver you can configure Tasmota to relay IR signals via WiFi and repeat IR signals in a different room using a 2nd IR Bridge.
The device can be easily integrated into home automation solutions such as Home Assistant. You can even place the device behind your TV and it should still be able to control it.
The best part is that as you decide what Firmware to install on it there is no need for another Mobile App or a Cloud Subscription.
What you get:
- 1x Wemos D1 Mini (Optional)
- 1x IR Bridge PCB
- 9x TSAL6400 IR LEDs
- 3x 2N2222A
- 3x 6R8 Resistors
- 1x TSOP38238 38kHz IR Receiver
Things you will need to provide:
- 5V/1A Power Supply via Micro USB.
If you do not fancy soldering your own, then take a look here.
Wholesale Orders or Customm Builds
Please contact Automate Things UK if you need to order a quantity of units, or need something custom.