Gosund 3+3AC 3USB Power Strip (PM03-T)
Available from:
Amazon.com
Install method:
Tuya-Convert
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | LedLinki |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | Relay_i 4 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | Relay 1 |
| GPIO13 | Relay 2 |
| GPIO14 | Relay 3 |
| GPIO15 | None |
| GPIO16 | Button 1 |
| GPIO17 | None |
Configuration
{"NAME":"Gosund-PM03-T","GPIO":[0,0,576,0,0,259,0,0,224,225,226,0,32,0],"FLAG":0,"BASE":18}
WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2021-10-18).
Tuya-Convert might not be possible for this device since the template was added (2021-10-18).
Nearly identical to the PM03-v2, but the template is different. Now sold under GHome brand, no name on front as shown, as of 2024-01-13 outlet extender still using ESP8285. Successfully flashed with Tasmota by soldering leads to marked points on underside of circuit board. Requires un-soldering AC mains from circuit board to disassemble.