{"NAME":"Genio I002341","GPIO":[0,0,0,0,56,0,0,0,21,17,0,0,0],"FLAG":0,"BASE":1}

Tuya-Convert might not be possible for this device if the manufacturer started using newest Tuya firmware since this template was published. Instead you can likely serial flash Tasmota without soldering with a flashing jig, if the device is easily opened.

This physically looks identical to Mirabella Genio 1002341. However the part-number on this starts with an “I” (letter I) not a “1” (digit 1).

The LED GPIO (for the red LED) is different, hence the new template.