Tuya RGB+CCT 12-24V LED Controller (ZB001)
Available from:
Aliexpress.com
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | PWM 3 |
| GPIO04 | PWM 2 |
| GPIO05 | PWM 5 |
| GPIO06 | None |
| GPIO07 | None |
| GPIO08 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | None |
| GPIO18 | PWM 1 |
| GPIO19 | PWM 4 |
| GPIO20 | None |
| GPIO21 | None |
Configuration for ESP32-C3
{"NAME":"ZB001","GPIO":[0,0,0,418,417,420,0,0,0,0,0,0,0,0,0,0,0,0,416,419,0,0],"FLAG":0,"BASE":1}
This device uses
WB3S
module which needs to be replaced with
ESP8685-WROOM-01, ESP-12, ESP-C3-12F, ESP-12H, ESPC2-12 or ESP8684-WROOM-01C
. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.
The chip used on this board is a WB3S, and requires a transplant.