Avatto Temperature and Humidity Sensor and IR Controller (S08Pro)
Available from:
Aliexpress.com
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | I2C SDA 1 |
| GPIO02 | None |
| GPIO03 | I2C SCL 1 |
| GPIO04 | Led 1 |
| GPIO05 | IRrecv |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | Button 1 |
| GPIO14 | IRsend |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"S08Pro","GPIO":[0,640,0,608,288,1088,0,0,0,32,1056,0,0,0],"FLAG":0,"BASE":18}
This device uses
WB3S
module which needs to be replaced with
ESP-12, ESP-C3-12F or ESP-12H
. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.
There is an AHT10 temperature/humidity sensor (bottom left on pic). I’ve removed TuyaMCU chip and closed SCL/SDA pins on PCB directly to ESP8266. It works great with AHT1x Tasmota driver #define USE_AHT1x:
