BlitzWolf RGB Atmosphere and CCT Ceiling Light (BW-CLT1)
Available from:
Banggood.com
Aliexpress.com
Manufacturer:
Blitzwolf.com
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | None |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | PWM 4 |
| GPIO05 | None |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | PWM 3 |
| GPIO13 | PWM 5 |
| GPIO14 | PWM 2 |
| GPIO15 | PWM 1 |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"BW-CLT1","GPIO":[0,0,0,0,419,0,0,0,418,420,417,416,0,0],"FLAG":0,"BASE":18, "CMND":"SO37 128"}
This device uses
WB3L
module which needs to be replaced with
ESP8685-WROOM-01, ESP-12, ESP-C3-12F, ESP-12H, ESPC2-12 or ESP8684-WROOM-01C. Read more about module replacement in a detailed guide.
The pull up resistors are required in GPIO0 and CH_EN and a pull down resistor for GPIO15 when using ESP-12E/F