CBI Astute Smart Controller Power Monitoring DIN Relay (ASC-BP)
Available from:
Builders.co.za
Manufacturer:
Cbi-lowvoltage.co.za
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | HLWBL SELi |
| GPIO01 | Led_i 1 |
| GPIO02 | None |
| GPIO03 | None |
| GPIO04 | None |
| GPIO05 | Relay 1 |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | BL0937 CF |
| GPIO13 | Button 1 |
| GPIO14 | HLWBL CF1 |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"CBI Astute","GPIO":[2624,320,0,0,0,224,0,0,2720,32,2656,0,0,0],"FLAG":0,"BASE":6}
For more accurate energy consumption measurements this device requires power monitoring calibration.
This device uses WR3E module which needs to be replaced with ESP8685-WROOM-01, ESP-12, ESP-C3-12F, ESP-12H, ESPC2-12 or ESP8684-WROOM-01C. Read more about module replacement in a detailed guide.
This device uses WR3E module which needs to be replaced with ESP8685-WROOM-01, ESP-12, ESP-C3-12F, ESP-12H, ESPC2-12 or ESP8684-WROOM-01C. Read more about module replacement in a detailed guide.