DETA Mechanism Switch (6014HA)

Available from:
Bunnings.com.au
Install method:
Replace module
GPIO # | Component |
---|---|
GPIO00 | None |
GPIO01 | None |
GPIO02 | None |
GPIO03 | None |
GPIO04 | None |
GPIO05 | None |
GPIO09 | None |
GPIO10 | None |
GPIO12 | Led_i 1 |
GPIO13 | None |
GPIO14 | Button 1 |
GPIO15 | None |
GPIO16 | Relay 1 |
GPIO17 | None |
Configuration
{"NAME":"Deta 6014HA","GPIO":[0,0,0,0,0,0,0,0,320,0,32,0,224,0],"FLAG":0,"BASE":18}
This device uses
WB3S
module which needs to be replaced with
ESP-12, ESP-C3-12F or ESP-12H
module. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.
Replace WB3S with ESP12F. Link GPIO15 to Gnd. Link EN to Vcc