EBERG ROT 720 Infrared Heater (5903357332266)
EBERG ROT 720 Infrared

Available from:

Install method:
Replace module

GPIO #Component
GPIO00 None
GPIO01 Tuya Tx
GPIO02 None
GPIO03 Tuya Rx
GPIO04 None
GPIO05 None
GPIO09 None
GPIO10 None
GPIO12 None
GPIO13 None
GPIO14 None
GPIO15 None
GPIO16 None
GPIO17 None
{"NAME":"Tuya MCU","GPIO":[0,2272,0,2304,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":54,"CMND":"TuyaMCU 11,4 | TuyaMCU 72,2 | TuyaMCU 71,3"}
This device uses WBR3 module which needs to be replaced with ESP-12, ESP-C3-12F or ESP-12H module. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill.

Chip WBR3 replaced with ESP-12S. MCU config: ‘Backlog TuyaMCU 11,4; TuyaMCU 72,2; TuyaMCU 71,3;’