LightZone MeLiTec Ceiling Light (D114)

Available from:
Leuchtenservice-melitec.de
Install method:
Replace module
GPIO # | Component |
---|---|
GPIO00 | None |
GPIO01 | Tuya Tx |
GPIO02 | None |
GPIO03 | Tuya Rx |
GPIO04 | None |
GPIO05 | None |
GPIO09 | None |
GPIO10 | None |
GPIO12 | None |
GPIO13 | None |
GPIO14 | None |
GPIO15 | None |
GPIO16 | None |
GPIO17 | None |
Configuration
{"NAME":"LightZone MeLiTec D114 Light ","GPIO":[0,2272,0,2304,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":54,"CMND":"TuyaMCU 11,20 | TuyaMCU 21,22 | TuyaMCU 23,23 | DimmerRange 25,1000"}
This device uses
WR3
module which needs to be replaced with
ESP-12, ESP-C3-12F or ESP-12H
. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.