iLintek / Lumary Dimmer (L-DS100)
Available from:
Amazon.com
Lumary.tech
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | User |
| GPIO01 | Tuya Tx |
| GPIO02 | User |
| GPIO03 | Tuya Rx |
| GPIO04 | User |
| GPIO05 | User |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | User |
| GPIO13 | User |
| GPIO14 | User |
| GPIO15 | User |
| GPIO16 | User |
| GPIO17 | None |
Configuration
{"NAME":"L-DS100","GPIO":[1,2272,1,2304,1,1,0,0,1,1,1,1,1,0],"FLAG":0,"BASE":54}
This device uses
WR3
module which needs to be replaced with
ESP-12, ESP-C3-12F or ESP-12H
. Besides the module, this process will require a heat gun, soldering tools and moderate soldering skill. Read more about module replacement in a detailed guide.